| Archive for EmeraldCoastPierFishing.com Fishing reports, pictures, and discussion dedicated to the fishing piers along the gulf coast of Alabama and Northwest Florida |
| squidder |
Mitchell 306 PUMs and CrosswindsI have been reading this long thread and I can help! I have nine 306 original PUMs and original Crosswind Discs. I will admit that my prices are high, but I paid a small fortune for them myself. I too fish only vintage Mitchell reels and have been looking for these for 2 years. I have the manual arms with rollers on them. The arms are original with the Fisherman's roller on them. I have been fishing his PUMs for 3 years now with no problems. Mitchellparts.com has no discs left. The disc and manual set is $60.00. I do apologize for the price, but as I said I paid a small fortune for them. These parts are getting extremely scarce. I have many mitchell parts on hand. Just let me know what you may need. Thanks! |
||
| ghettowrapped |
how much for all of the manuals and x-winds without the rollers? do realize that i am the only one to reply to your post so far. | ||
| stvtackett |
if ghetto gets those give me a price on a couple of rollers, i have a couple of arms without rollers.. | ||
| kingling |
how much for a crosswind and just the arm?[if ferd or steve dont get them] | ||
| blaminack |
How much for just the oil from between the roller and the arm? I am way low....LOL | ||
| squidder |
I would really like to make sure that several people get the benefits of these parts they need, not just one. The price breakdown is $50 per arm/roller and $14 for each disc. The package deal is better as mentioned above. I can't break up the rollers and arms. There really is no mark-up on these parts. I am pretty sure that in a few months I will have after market 306/406 stainless kits. I do not have a price yet, but they will definitely be less than the original ones I have now. Thanks for asking. If interested, PM me your phone # or contact info. | ||
| squidder |
I do have rollers for $14 each with the nut if interested. Thanks! | ||
| stvtackett |
hell, somebody is interested in everything. just not togeather | ||
| ghettowrapped |
you're welcome and no thanks. |
||
| outlawsr <0)))>{ |
How much do you want for the dust that was on them? i need to put some on my fishin equipment as my girl thinks i fish to much if she see's dust maybe she will change her mind | ||
| squidder |
Dust is free! | ||
| squidder |
I have 7 of the made in France original 306/406 PUMs left with the original compression crosswind discs. | ||
| stvtackett |
i hear ya squidder about not being able to take a loss and don't blame you. but can't see paying 60 bones to make a $30 reel a $60 dollar reel. i'm thinking about trying to find somebody to use an arm i got to cut some for resale. seems like those things are harder to find than 302/402 manuals... | ||
| squidder |
I hear ya Stv. I already have some being made but will not have them for 60-90 days. They will be stainless just like the originals with both screws. They will also be quite a bit cheaper due to the qty I am having made. Will keep the post updated. thanks | ||
| squidder |
I am down to 5 manuals left. I do however have 15 crosswind discs left. | ||
| Calvin |
I see that you sold just a 306 arm yesterday for 41 dollars.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=130341170595 That was you Rick, correct? The seller is from Navarre. Either way it shows the demand is justifying the price. |
||
| squidder |
Calvin, That was not mine, but it does show these are rare and expensive. I have sold several with discs and no complaints. After all, they are the original made by Mitchell stainless arms and discs. I make $3.50 profit off each kit sold. Not much of a markup. Especially when I said I will deliver to OIP. The Fisherman's rollers on them work great also! I went out off the surf this weekend and had no problems with the one I put on my custom 306. Thanks for inquiring Calvin. | ||
| eagleprez |
Calvin, I bought a custom aluminum spool for a 306 from that guy, Saturday. That arm your talking about, He advertised as a 306 / 302. It can't be both can it. |
||
| Calvin |
It's a 306 arm. Don't know why he put 302. Probably to attract more viewers because that would show up in search results. The same guy also has a 402 w/ manual up right now with 302 advertised in the listing because...
|
||
| stvtackett |
damn, i have a couple of 306 arms laying around. i need to rethink what they are doing versus making some money. | ||
| squidder |
Put them on a couple 306s with 2 new rollers and fish them! 306s are cheap still. All you need is 2 rollers, 2 crosswind discs, and a beefed up drag. I can help you get them ready if needed. I have 306s being fished out there catching Kings and more. have fun! | ||